The NE1D water baths are built comprising of a high quality corrosion resistant stainless steel tank and with a bright clean finish housed in a durable paint finished outer case. Designed for immersion of flasks, bottles and racks in a highly stable temperature environment throughout the water bath. The shelf in the stainless steel tank provides a stable support for flasks, bottles and racks that can be removed for cleaning. The shelf is a low height design maximising the working height.
- Before leaving the factory every water bath is identified with a unique serial number and undergoes a factory calibration adjusting control to known traceable value
- Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book
- Painted surfaces feature “anti-bacterial technology” which inhibits bacterial growth, improving hygiene requirements as demanded by clinical and laboratory environments
- Thermal cut out fitted in the heater
- IP rated clear booted on/off power switch
- Bath fitted with non-slip rubber feet
- Simple digital LED controller for setting temperature with 1°C increments
- Temperatures can be easily and rapidly set with the push button, wipe clean control panel
- Temperature setting is retained in memory, even after ‘power off’
- Illuminated on/off switch and heater indication lamp
- Heaters and temperature sensor are concealed under the tank providing an easy to clean working area
- Heating footprint covers the underside of the tank and with a low mass provides rapid energy transfer, resulting in quicker heat up times and a reduction in energy consumption and improved temperature uniformity
- Above 60°C it is recommended that to achieve optimum performance the bath should be covered with a lid or layer of polypropylene spheres
- Covering the bath with a lid reduces energy consumption and running costs
- This range of baths will operate at 99°C however are not designed for continuous boiling